SPECIFICATIONS : AND AD-4329A INDICATORS
|
Input sensitivity |
0.2µV/D (min) |
Input signal range |
-1mV to + 15 mV |
Load cell excitation |
5V DC ±5% |
Load cell drive capacity |
Up to 8 units of load cell at 350Ω (120mA) |
Zero temperature coefficient |
±(0.2µV+8ppm of dead load)/°C (typ) |
Span temperature coefficient |
±8ppm/°C of reading (typ) |
Non-Linearity |
0.01% of full scale |
Maximum input noise |
Less than 0.4µVp-p |
Input impedance |
10MΩ or more |
A/D conversion method |
Integrating dual slope type |
A/D internal resolution |
40,000 counts |
Maximum display resolution |
20,000 counts (maximum) |
A/D conversion rate |
Approximately 10 times/sec |
Weight display |
Vacuum fluorescent display, 7 digits, 7segment,, 13mm (character height) |
Annunciator |
Stable, Zero point, Gross, Net, Tare, Accumulation, kg or lb |
Keys |
STANDBY/OPERATE, NET/GROSS, PRESET TARE, TARE, ZERO, M+, MODE, PRINT |
Power supply |
100 to 240V AC ( to be switched on voltage request), 45 to 65 Hz, 30VA |
Net weight |
Approximately 1.8kg/4.0lb |
Dimensions |
192 x 96 x 165mm |
Panel cut out dimensions |
186 x 92mm |
Operating temperature |
-10°C to 40°C (14 °F to 104 °F) |
Storage temperature |
-10°C to 40°C (14 °F to 158 °F) |