Compact in size. Cost effective design. Basic unit is available for simple weighing purpose. Three opto-coupler input are available. kg/lb conversion is available. Hold/valley hold function is available. Hysteresis control is available for Hi/Lo comparator. PT650D is suitable for all kinds of application such as hopper and weigh platform.
- Modify based on software of PT650C
- 6 kinds of Peak/Valley hold function can be selected (Manual or Automatic reset)
- Three programmable opto-coupler input.
- 9 kinds of input function can be selected. Clear and stable LED display.
- Hysteresis Hi/Lo comparator is available. kg/lb conversion is available.
- Span calibration by calculated sensitivity is available.
- Standby mode is available.
- RS-data output can be activated by external 'Print' function.
- Cascaded RS232 option is available for multi-drop communication.
- Delta sigma conversion method.
- Keyboard function can be remotely controlled by RS232/RS485 or opto-coupler input.
- Digital filter is provided for different sensitive enviromment.
- Conversion rate up to 200 times/sec.
- Optional RS232 or RS485 serial input/output port.
- Optional Hi/Lo comparator output.
- Optional simple batching software.
- Optional BCD board or analog output.
Mains Supply 110V or 220V AC selectable, 50/60 Hz
Power Consumption 9VA
Line Filter Built-in
Operating Temperature -5C to 50C (23F to 122F)
Relative Humidity 90%, non-condensing
Load Cell Type All strain gauge type
Load Cell Supply 10V DC, 150mA, 4 x 350 load cell
Input Sensitivity 0.5 V/D to 200 V/D
Zero Point Adjustment Range from 0.05mV to 15mV
Temperature Coefficient 8 ppm/C of F.S.D.
Non-Linearity 0.005% of F.S.D.
Conversion Rate 200 times / second
Internal Resolution 16,700,000
Scale Range 500 t